ProMaster 8026 用户手册

 

 

The indicator light above the off and on switch will flash when the microphone is turned on if 

the battery is good. When the battery level reaches approximately one hour of remaining use, 

the indicator light will glow and the battery should be replaced. A CR2 battery will normally last 

for up to 800 hours depending on the frequency and pattern of use. 

   

1. 

Use only a primary (non rechargeable) CR2 lithium battery. The battery supplied cannot 

be recharged. 

2. 

If you will not be using the microphone for an extended period of time, remove the battery 

before storage. 

3. 

If the battery leaks, be sure to thoroughly clean the battery compartment before installing 

a new battery.

   

 

Slide the foot of the microphone into to the accessory shoe of your camcorder or DSLR (see 

Figure 1).    Turn the locking wheel to fix the microphone in place. Be sure that your camcorder 

or DSLR is POWERED OFF. Insert the mini stereo plug of the microphone into the external 

microphone input of your camcorder or DLSR. (See Figure 2)