Panamax 7500-PRO 用户手册
MAX PRO-SERIES Communication/Configuration Specifications (continued)
USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901
12
?ID<CR>
?TRIGSTAT<CR>
?OUTLETSTAT<CR>
?POWERSTAT<CR>
?VOLTAGE<CR>
?CURRENT<CR>
?HELP<CR>
Request that the unit identify itself.
Request the on/off status of the front panel
button and input trigger.
button and input trigger.
Request the on/off status of the
outlet banks and output trigger.
outlet banks and output trigger.
Request the status of the input voltage.
Request the line voltage.
Request the input current draw.
Request a list of all commands
and queries.
and queries.
2.1
2.2
2.3
2.4
2.5
2.6
2.7
$PANAMAX<CR>
$MAX 74/7500-PRO<CR>
$FIRMWARE revision<CR>
if front panel button is ON, $BUTTON = ON<CR>
if front panel button is OFF, $BUTTON = OFF<CR>
if input trigger is ON, $TRIGIN = ON<CR>
if trigger input is OFF, $TRIGIN = OFF<CR>
$BANK1 = status<CR>
$BANK2 = status<CR>
$BANK3 = status<CR>
$BANK4 = status<CR>
$HC1 = status<CR>
$HC2 = status<CR>
$TRIGOUT = status<CR>
status = { ON, OFF }
if input voltage is within limits, $PWR = NORMAL<CR>
during overvoltage, $PWR = OVERVOLTAGE<CR>
during undervoltage, $PWR = UNDERVOLTAGE<CR>
during recovery, $PWR = RECOVERY<CR>
If 140V > Vin > 90: $VOLTAGE = xxx<CR>
where xxx is the input line voltage expressed in decimal format. If the
voltage is less than 100, the hundreds digit is represented with a 0.
For example, a line voltage of 92VAC would be expressed as:
voltage is less than 100, the hundreds digit is represented with a 0.
For example, a line voltage of 92VAC would be expressed as:
$VOLTAGE = 092<CR>
If Vin > 140V: $VOLTAGE = OVERVOLTAGE
If Vin < 90V: $VOLTAGE = UNDERVOLTAGE
$CURRENT = xxx<CR>
where xxx is the input current expressed in decimal format. If the cur-
rent is less than 10, the tens digit is represented with a 0. For example,
a current of 3.3A would be expressed as:
rent is less than 10, the tens digit is represented with a 0. For example,
a current of 3.3A would be expressed as:
$CURRENT = 03.3<CR>
Transmit a listing of all commands and queries.
QUERIES
Query Description Response