Bosch HDI8054U 手册

English 38

Use these suggestions before calling for service to avoid 
service charges.

Burner(s) do not light / Ignitors do not 
spark

•

Make sure that the gas shut off valve is in the ON position and the gas 
supply to the house is not shut off.

•

Make sure the burner caps are properly positioned and the burner 
ports are not clogged. Clear ports with a wire or straightened paper clip 
if clogged.

•

Make sure the igniters are clean and dry.

•

Check the power supply. It should be properly grounded with the 
correct polarity. Make sure the unit is plugged in and the circuit breaker 
is not tripped.

Burner flame goes out unexpectedly

•

Make sure that there is no draft in the room.

Ignitors spark even though knobs are in 
the off position 

•

When the electrical power connection has been activated at the first 
power up or reconnected after an outage, the igniters may spark once 
or twice even though all burner knobs are in the off position.

Cooking results are not what was 
expected

•

The cooktop is not level.

•

Cooking pan does not fit the surface being used.

•

Cookware is not the type or size recommended.

Water takes too long to boil

Time to boil can vary greatly depending on environmental conditions. See 
“Boiling Water” in this manual for tips to decrease time to boil.