GE JNM3163DJBB 安装指导

  Place the mounting plate against the wall and insert 

the toggle wings into the holes in the wall to  

mount the plate.

NOTE: Before tightening toggle bolts and wood screw, 

make sure the tabs on the mounting plate touch the 

bottom of the cabinet when pushed  

flush against the wall and that the plate is properly 

centered under the cabinet.

 Be careful to avoid 

pinching fingers between the back of the 

mounting plate and the wall.

  Tighten all bolts. Pull the plate away from the wall to 

help tighten the bolts.

     

 

Attach the plate to the wall using toggle bolts. At least 

one wood screw must be used to attach the plate to a 

wall stud.
  Remove the toggle wings from the bolts. 
  Insert the bolts into the mounting plate  

through the holes designated to go into drywall and 

reattach the toggle wings to 

3

/

4

”

 onto each bolt. 

A1. Attach Mounting Plate to Wall

A2. Prepare Top Cabinet

A3. Install Adapter

A4. Mount Oven

A5. Adjust Exhaust Adaptor

A6. Connect Ductwork

Wall

Mounting 

Plate

Spacing for 

Toggles More Than 

Wall Thickness

Bolt End

Toggle  

Bolt

Toggle Wings