GE JNM3163DJBB 安装指导

      Slide the old filter down and out to remove it. 
      Remove plastic and other outer wrapping from the 

new filter and install the new filter. When properly 

installed, the wire mesh of the filter should be visible 

from the front.

     Replace the grille and the 2 screws.
      Close the door.

If the model is not vented to the outside, the air will be 

recirculated through a disposable charcoal filter that 

helps remove smoke and odors.
The charcoal filter should be replaced when it is 

noticeably dirty or discolored (usually after 6 to  

12 months, depending on hood usage). See your 

Owner’s Manual for the filter kit number.

        Open the microwave door.
      Remove 2 screws from the top of the grille. (You may 

need to open the cabinet doors to remove the screws.

     Slide the grille to the left and forward to remove.

4  Tighten the two screws to the top of the oven 

completely. (While tightening screws, hold  

the oven in place against the wall and the top 

cabinet.)

Attach the oven to the top cabinet by inserting  

2 self-aligning screws through outer top cabinet 

holes. Turn two full turns on each screw. 

  Install grease filters. See the Owner’s Manual 

packed with the oven.

Insert filter mesh-side up

Charcoal 

Filter