KitchenAid KUWL304ESS-SS 用户手册

下载
页码 36
8
8
Wine Racks
Remove and Replace the Wine Racks
1. Pull the rack forward until it stops. 
2. Release the rack from the supports. 
Style 1 - Push in on the tabs to release the rack.
Style 2 - Lift up on the left-hand lever while pressing 
down on the right-hand lever to release the rack.
3. Pull the rack forward and lift it up and out of the rack 
supports
4. Replace the rack by inserting the rack into the supports and 
sliding it toward the rear of the wine cellar.
Stocking the Wine Cellar
NOTES: 
For optimum wine storage, place white wines on the upper 
rack of the wine cellar and place red wines on the lower rack 
of the wine cellar.
The wine racks can be stocked with the bottles facing either 
direction, however, to optimize storage adjacent bottles 
should be facing in opposite directions.
To Stock the Wine Cellar
1. Start stocking the wine cellar with the bottom display rack.
2. Starting on the left-hand side, place the first bottle on the 
bottom of the rack with the neck of the bottle facing the front 
of the wine cellar.
3. Place the next bottle on its side with the neck of the bottle 
facing the back of the wine cellar. Alternate the direction of 
the bottles, in this manner, until the display rack is full. 
4. Slide the bottom rack into place and pull the next rack 
forward. 
5. Continue stocking each remaining rack as described in the 
above steps.
A. Tabs
A. Lever
A
A
A