KitchenAid KBSD608EBS 使用和维护

Proper Disposal of Your Old Refrigerator

IMPORTANT: Child entrapment and suffocation are not 

problems of the past. Junked or abandoned refrigerators are still 

dangerous, even if they will sit for “just a few days.” If you are 

getting rid of your old refrigerator, please follow these instructions 

to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:

 

■

Take off the doors.

 

■

Leave the shelves in place so that children may not easily 

climb inside.

refrigerants:
Dispose of refrigerator in accordance with Federal and Local 

regulations. Refrigerants must be evacuated by a licensed, 

EPA certified refrigerant technician in accordance with 

established procedures.

BEFORE USE

 

■

Remove tape and glue residue from surfaces before turning 

on the refrigerator. Rub a small amount of liquid dish soap 

over the adhesive with your fingers. Wipe with warm water 

and dry.

 

■

Do not use sharp instruments, rubbing alcohol, flammable 

fluids, or abrasive cleaners to remove tape or glue. These 

products can damage the surface of your refrigerator. For 

more information, see “Refrigerator Safety.”

 

■

Dispose of/recycle all packaging materials.

After you remove all of the packaging materials, clean the inside 

of your refrigerator before using it. See the cleaning instructions 

in “Refrigerator Care.”

Important information to know about glass shelves 
and covers:
Do not clean glass shelves or covers with warm water when 
they are cold. Shelves and covers may break if exposed to 
sudden temperature changes or impact, such as bumping. 
Tempered glass is designed to shatter into many small, 
pebble-size pieces. This is normal. Glass shelves and covers 
are heavy. Use both hands when removing them to avoid 
dropping.

Water Supply Requirements

Read all directions before you begin.
IMPORTANT:

 

■

When your refrigerator was installed, the water connection 

from the water source should have been connected to your 

refrigerator. If your refrigerator is not connected to a water 

source, see “Connect to Water Line” in the Installation 

Instructions. If you have any questions about your water 

connection, see “Troubleshooting” or call a licensed, qualified 

plumber.

A cold water supply with water pressure between 30 and 120 psi 

(207 and 827 kPa) is required to operate the water dispenser and 

ice maker. If you have questions about your water pressure, see 

“Troubleshooting” or call a licensed, qualified plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of 

a reverse osmosis system going to the water inlet valve of the 

refrigerator needs to be between 30 and 120 psi (207 and 

827 kPa).
If a reverse osmosis water filtration system is connected to your 

cold water supply, the water pressure to the reverse osmosis 

system needs to be a minimum of 40 psi (276 kPa).
If the water pressure to the reverse osmosis system is less than 

40 psi (276 kPa):

 

■

Check to see whether the sediment filter in the reverse 

osmosis system is blocked. Replace the filter if necessary.

 

■

Allow the storage tank on the reverse osmosis system to refill 

after heavy usage.

 

■

If your refrigerator has a water filter, it may further reduce 

the water pressure when used in conjunction with a reverse 

osmosis system. Remove the water filter. See “Water Filtration 

System.”

If you have questions about your water pressure, call a licensed, 

qualified plumber.

 

■

If you turn the refrigerator on before the water line is 

connected, turn the ice maker Off. See “Ice Maker and 

Storage Bin.”

 

■

All installations must meet local plumbing code requirements.