KitchenAid KUDS30FXPA 安装指导

Place towel under drain hose to catch any water in drain hose. 
Place the small green drain hose clamp onto the small end of the 
drain hose. Push the new drain hose into the black drain hose 
connector up to the drain hose stop.

Using pliers, squeeze open the small green drain hose clamp and 
slide onto connector between stops.

After hose is connected, remove towel.
If needed, see website for animated representation of this step. 
Visit www.kitchenaid.com/drain under FAQ tab.

NOTE: If the power supply cord was connected earlier, proceed to 
“Secure Dishwasher in Cabinet Opening” section.

Route cable so that it does not touch dishwasher motor or lower 
part of dishwasher tub. Pull cable through UL Listed/CSA 
Approved strain relief in terminal box. Strain relief is not supplied 
with the dishwasher. Owner must purchase a 

⁷⁄₈" screw-in type 

strain relief.
Select UL Listed/CSA Approved twist-on wire connectors (not 
included) rated to connect your household wiring to 16-gauge 
dishwasher wiring.