KitchenAid KSB1575ER 使用和维护

All indicator lights are flashing alternately. 

The Blender may be jammed. If it is 

jammed, the Blender will stop running to 

avoid damage to the motor. Press POWER 

to reset the Blender and unplug the power 

cord. Remove the pitcher assembly from 

the base and, with a scraper, free the blades 

by breaking-up or removing the contents at 

the bottom of the pitcher.

No indicator lights are lit. 

Check to see if the Blender is plugged into 

a grounded 3-prong outlet. If it is, press 

POWER; then unplug the Blender. Plug 

it back in to the same outlet, and Press 

POWER. If the Blender still does not work, 

check the fuse or circuit breaker on the 

electrical circuit the Blender is connected  

to and make sure the circuit is closed.

All indicator lights are flashing  

at the same time. 

The Blender may be overloaded. If the 

Blender becomes overloaded when blending 

heavy ingredients, it will automatically shut 

off to avoid damage to the motor. Press 

POWER to reset the Blender and unplug the 

power cord. Remove the pitcher assembly 

from the base and divide contents into 

smaller batches. Adding liquid to the pitcher 

may also reduce the load on the Blender.

If the problem cannot be fixed with the steps provided in this section, contact an authorized 

service center (see “Service and warranty” section). 

One indicator light is flashing alternately. 

If the Blender is plugged in, but will not start 

and one light is flashing alternately from all 

the other indicator lights, the Blender may 

have a stuck key. Press POWER to turn off 

the Blender; then unplug the Blender. Plug 

the Blender back in and press POWER to 

turn back on to reset the stuck key.

All indicator lights are flashing at the  

same time.

If Blender is plugged in, but nothing happens 

when POWER is pressed, and all indicator 

lights are flashing, the motor rotor may 

be locked. Press POWER; then unplug the 

Blender. Plug it back in; then press POWER 

and select the desired speed.

IMPORTANT: The Blender will not operate at any speed unless the POWER button is 

pressed first.

W10514184A_ENv3.indd   14

3/11/13   11:06 AM