KitchenAid KFC3511WH 使用和维护

1.  Be sure the Food Chopper is unplugged.
2.  Align the tabs on the work bowl with  

the L-slots on the base. Twist bowl 

counterclockwise to lock into place.

3.  Fit the blade over the shaft in the  

center of the work bowl, rotate, and 

press down until it locks into operating 

position.

5.  Place the lid on the workbowl, aligning 

the L-slots on the lid with the tabs on the 

work bowl. Twist lid counterclockwise to 

lock into place as shown below.

NOTE: Bowl and lid must be locked in 

place for the Food Chopper to operate.

6.  Plug power cord into electrical outlet.
7.  Press and hold Chop or 

Puree button to start 

processing.

1.  Once the blade has stopped spinning, 

remove lid by twisting it clockwise and 

lifting it off. 

2.  Remove the work bowl from the base 

by twisting it clockwise and lifting it off. 

Blade locks on the shaft to stay in place 

while you pour out ingredients

3.  Use the spatula to remove ingredients 

from the work bowl.

4.  To remove blade for cleaning, pull the 

blade straight up to unlock and remove it 

from the bowl.

8.  Use the wet ingredient adder to add 

liquid ingredients while processing, if 

desired. See “Operating Tips for Great 

Results”. 

9.  When ingredients are chopped to the 

desired consistency, release the Chop or 

Puree button.

NOTE: Food Chopper will not  

operate if both buttons are pressed  

at the same time.

4.  Place ingredients to be processed into 

the work bowl.