KitchenAid KSGB900ESS-SS 使用和维护

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge: 

 

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):

 

See the “Accessories” section for more information.

OVEN RACKS

■

Steel-wool pad

■

For racks that have discolored and are harder to slide, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Dishwasher (steam rack water reservoir only, not racks):

 

Although the water reservoir is durable, it may lose its shine 
and/or discolor when washed in a dishwasher.

BAKING DRAWER

Check that baking drawer is cool and empty before cleaning.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Mild detergent

OVEN CAVITY

Use AquaLift

®

 Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Clean cycle:

 

See “Clean Cycle” section.

Remove/Replace Drawer

Remove all items from inside the baking drawer or premium 
storage drawer, and then allow the range to cool completely before 
attempting to remove the drawer.

To Remove:

1. Open the drawer to its fully open position.

2. Using a flat-blade screwdriver, gently loosen the drawer from 

the glide alignment notch, and then lift up the drawer 
alignment tab from the glide.

3. Repeat Step 2 on the other side. The drawer is no longer 

attached to the drawer glides. Using both hands, pick up the 
drawer to complete the removal.

To Replace:

1. Align the forward drawer notches with the notches in the 

drawer glides on both sides. Place the rear alignment tabs into 
the drawer glides on both sides.

2. Push the drawer in all the way.

3. Gently open and close the drawer to ensure it is seated 

properly on the glides on both sides.

C

A

B

A

B