KitchenAid KVWB406DSS 安装指导

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently 
according to the following instructions. Replace grease filters 
before operating hood.

To avoid damage to the exterior surface, do not use steel wool or 
soap-filled scouring pads. 

Always wipe dry to avoid water marks.

■

Liquid detergent soap and water, or all-purpose cleanser

■

Wipe with damp soft cloth or nonabrasive sponge, then rinse 
with clean water and wipe dry.

1. Open the stainless steel panel. Grasp panel at the front 

corners and pull down to disengage the 2 catch pins from the 
spring catches. The panel is attached at the rear and will 
rotate down.

2. Remove each filter by pulling the spring release handle and 

then pulling down the filter. 

3. Wash metal filters as needed in dishwasher or hot detergent 

solution.

4. Reinstall the filter by making sure the spring release handles 

are toward the front. Insert aluminum filter into upper track.

5. Push in spring release handle.

6. Push up on metal filter and release handle to latch into place.

7. Repeat steps 1-5 for the other filter.

8. Close the stainless steel panel. Engage the (2) pins in the 

spring catches to secure. 

The charcoal filter is not washable. It should last up to 6 months 
with normal use. Replace with Charcoal Filter Kit Number 
W10272068.

1. Cover the grille that covers the blower motor with the 

charcoal filter so that the slots on the filter correspond to the 
pins on the sides of the motor grille.

2. Turn the charcoal filter clockwise to lock it.

3. Repeat steps 1-2 on the other filter.

The LED lights are replaceable by a service technician only. See 
“Assistance and Service” section for service contact information.

A

B

C

D

A

A

B

C