Kegco Digital Thermostat Power Control Unit 说明手册
Kegco Digital Temperature Power Control
The Kegco TC-321 is a digital temperature power control device that overrides an appliances' thermostat. Common
applications include using the TC-321 to control the power to a freezer to prevent it from getting too cold, or to control the
power to a terrarium to prevent it from getting too hot and maintaining a stable environment. It regulates the amount of
electricity getting to the appliance allowing you precise control over the temperature settings. The control has a setpoint
range of -40 to 100
℉
for a wide variety of uses and settings. It gives you control over the set temperature, as well as the
amount of temperature fluctuation between cycles.
It features pre-wired cords with a plug to install in your electrical socket and a receptacle to plug your appliance into for
easy installation. It has an LCD display which can show set temperature, real temperature and other control
functions. The TC-321 has both heating and cooling modes with adjustable setpoint and differential as well as the ability
to set a temperature alarm that will alert you if the appliance is too far outside the operating range you enter. A remote
sensor monitors the temperature inside the appliance while the display can be mounted outside, allowing you to make
adjustments without having to open and close the door of the appliance. Adhesive tape is provided for mounting the
display panel to the exterior of the appliance and a suction cup on the sensor wire allows you to place it inside the
appliance and out of the way of it's contents.
It features pre-wired cords with a plug to install in your electrical socket and a receptacle to plug your appliance into for
easy installation. It has an LCD display which can show set temperature, real temperature and other control
functions. The TC-321 has both heating and cooling modes with adjustable setpoint and differential as well as the ability
to set a temperature alarm that will alert you if the appliance is too far outside the operating range you enter. A remote
sensor monitors the temperature inside the appliance while the display can be mounted outside, allowing you to make
adjustments without having to open and close the door of the appliance. Adhesive tape is provided for mounting the
display panel to the exterior of the appliance and a suction cup on the sensor wire allows you to place it inside the
appliance and out of the way of it's contents.
Safety Tips:
Before using this product, it must be properly positioned and installed as described in this manual, so please read the
manual carefully. To reduce the risk of fire, electrical shock or injury when using the product, follow these basic
precautions. Failure to heed these safety requirements may result in severe personal injury or death.
manual carefully. To reduce the risk of fire, electrical shock or injury when using the product, follow these basic
precautions. Failure to heed these safety requirements may result in severe personal injury or death.
Pay attention to indications on the electrical socket when installing any cooling or heating equipment. Do not use in
a loose electrical socket as they are a potential fire hazard.
a loose electrical socket as they are a potential fire hazard.
Do not use this product in the vicinity of any flammable vapors or liquids. The fumes can create a fire hazard or
explosion. Do not use the product in a wet environment where a short may occur.
explosion. Do not use the product in a wet environment where a short may occur.
This product is not intended for use in areas with humidity above 90%
Not for use in areas that experience high vibration.
For use in environments with and ambient temperature range of -20F to 60F.
Not for use in dusty areas. Dust inside the product could cause it to fail.
Do not locate the product near wireless electromagnetic interference or magnetic fields.
DISCLAIMER:
Do
not use this device to control equipment outside the parameters set forth by the equipment’s manufacturer. Contact
with components carrying hazardous voltage can cause electrical shock and may result in severe personal injury or death.