Monessen Hearth 6000DV 用户手册

下载
页码 52
42D0200 
15
Read all instructions completely and thoroughly before attempting installation. Failure 
to do so could result in serious injury, property damage or loss of life. Operation of 
improperly  installed  and  maintained  venting  system  could  result  in  serious  injury, 
property damage or loss of life. 
W
ARNING
Failure to follow these instructions will 
void the warranty. 
NOTICE 
INSTALLATION PRECAUTIONS
NOTE: This appliance must be installed with a Monessen approved venting system only. 
Consult local building codes before beginning the installation. The installer must make sure to select the proper vent system 
for installation. Before installing vent kit, the installer must read this fireplace manual and vent kit instructions. 
Only a qualified installer/service person should install venting system. The installer must follow these safety rules:
  •  Wear gloves and safety glasses for protection.
  •  Use extreme caution when using ladders or when on rooftops.
  •  Be aware of electrical wiring locations in walls and ceilings.
The following actions will void the warranty on your venting system:
  •  Installation of any damaged venting component.
  •  Unauthorized modification of the venting system.
  •  Installation of any component part not manufactured or approved by Monessen.
  •  Installation other than permitted by these instructions. 
FINISHING MATERIAL
NOTE: Any remote wiring (i.e. remote control, wall switch, and optional fan) must be done prior to final 
finishing to avoid costly reconstruction.
INSTALLATION INFORMATION
Only noncombustible materials (i.e. brick, tile, slate, steel, or other materials with a UL fire rating of Zero) may be used to 
cover the black-painted face of the appliance. A 300°F minimum adhesive may be used to attach facing materials to the black 
surface. If joints between the finished wall and the fireplace surround are sealed, a 300°F minimum sealant material (General 
Electric RTV103 or equivalent) must be used. Combustibles may come to the top and side edges but not overlay the face. 
Never  obstruct  or  modify  the  air  inlet  or  outlet  grills  (louvers).  This  may  create  a 
fire hazard.
W
ARNING
VENT INSTALLATION