Vermont Casting ODGSR42A 用户手册

下载
页码 20
9
ODGSR Series Outdoor Gas Fireplace
20007114
Operating Instructions
Log Installation
1. Remove logs from the packaging. 
As with all plastic, these bags 
are not toys and should always 
be kept away from children and 
infants.
2. Place left rear log on rear log support. 
Ensure that log is firmly positioned and 
there is no side-to-side movement. (Figs. 
11 & 12)
3. Carefully place Ember Log between 
grate and burner. (Figs. 11 & 12)
4. Place the front of right rear log on the 
burner and the back of the log on the 
rear log support.
5. Place the top logs onto the locator 
notches. Ensure the logs are secure. 
(Fig. 11 & 12)
First Firing
Upon completing the gas line connection, a small 
amount of air will be trapped in the line. When 
first lighting the unit with pilot light, it will take a 
few minutes to purge the trapped air. Once purg-
ing is complete, the pilot and burner will light and 
operate as indicated in the instruction manual. 
Subsequent lightings of the appliance will not 
require purging. 
When lit for the first time, the appliance will emit 
a slight odor for an hour or two. This is due to 
paint and lubricants used in the manufacturing 
process.  After each lighting, vapor may con-
dense and fog the glass; this moisture disap-
pears in a few minutes of burning.
LG317
UVODSR36 
logs
11/24/03  djt
Right Cross 
Log
Left Cross 
Log
Left Rear 
Log
Right Rear 
Log
Ember 
Log
LG317
Fig. 11  ODGSR36  log placement.
LG318
ODUVSR42
log set
11/24/03   djt
Left Rear 
Log
Left Cross 
Log
Middle Cross Log
Right Cross 
Log
Right Rear 
Log
Log Left 
Ember
Grate
Fig. 12  ODGSR42A log placement.
LG318
Log Right 
Ember