Toshiba A10 用户手册

User’s Manual

4-4

Operating Basics

How to Swipe your Finger

Using the following steps when swiping fingers for fingerprint registration or

authentication will help to minimize authentication failures:
Align the first joint of the finger to the center of the sensor. Lightly touch the

sensor and swipe finger levelly towards you until the sensor surface

becomes visible. In performing this process, you should also take care to

ensure that the center of your fingerprint is on the sensor.
The following illustrations show the recommended way to swipe your finger

over the fingerprint sensor.

Figure 4-3 Swipe the finger

Sensor

■

Avoid swiping with your finger stiff or pressed too hard onto the sensor,

and take care to ensure that the center of the fingerprint is touching the

sensor before swiping. Either of these conditions may cause fingerprint

reading to fail.

■

Check the center of the fingerprint whorl before swiping and then

ensure this is swiped along the center line of the sensor.

■

There is a possibility of authentication failures if the finger is swiped too

quickly or too slowly - follow any on-screen instructions to adjust the

speed used during the swipe process.