KitchenAid KESS908 用户手册

■

Is the power supply cord unplugged? Plug into a grounded 
outlet.

■

Has a household fuse blown, or has a circuit breaker 
tripped? Replace the fuse or reset the circuit breaker. If the 
problem continues, call an electrician.

■

Is the control knob set correctly? Push in knob before 
turning to a setting.

■

On some ceramic glass models, is the Cooktop Control 
Lock set? See “Control Lock/All Off” in “Cooktop Controls - 
Touch Activated Custom Control Temperature Management 
System” section.

■

Is the cookware the proper size? Use cookware about the 
same size as the surface cooking area, element or surface 
burner. Cookware should not extend more than ½" (1.3 cm) 
outside the cooking area.

■

Does the hot surface indicator light stay on after controls 
have been turned off? See “Hot Surface Indicator Lights” in 
“Cooktop Controls - Touch-Activated Custom Control 
Temperature Management System,” “Cooktop Controls - 
Custom Knobs Custom Control Temperature Management 
System” or “Cooktop Controls - Standard Knobs” section, 
depending on your model.

■

Is the proper cookware being used? See “Cookware” 
section.

■

Is the control knob or element controls set to the proper 
heat level? See “Cooktop Controls - Touch-Activated 
Custom Control Temperature Management System,” 
“Cooktop Controls - Custom Knobs Custom Control 
Temperature Management System” or “Cooktop Controls - 
Standard Knobs” section, depending on your model.

■

Is the appliance level? Level the appliance. See the 
Installation Instructions.

■

Is the electronic oven control set correctly? See “Glass 
Touch-Activated Electronic Oven Control” section.

■

Has a delay start been set? See “Timed Cooking” section.

■

On some models, is the Control Lock set? See “Control 
Lock” section.

■

On some models, is the Sabbath Mode set? See “Sabbath 
Mode - Option 7” section.

■

Does the oven temperature calibration need adjustment?
See “Oven Temperature Calibration - Option 6” section.

■

On some models, does the cooling fan run during BAKE, 
BROIL or CLEAN? It is normal for the fan to automatically 
run when the oven is in use. This helps cool the electronic 
control.

■

Is the display showing “SET CLOCK”? There has been a 
power failure. Clear the display. See “Oven Displays” section. 
On some models, reset the clock, if needed. See “Clock/
Timer Display” section.

■

Is the display showing a letter followed by a number?
Press OFF to clear the display. See “Oven Displays” section. 
If a letter followed by a number reappears, call for service. 
See “Assistance or Service” section.

■

Is the oven door open? Close the oven door all the way.

■

Has the function been entered? See “Self-Cleaning Cycle” 
section.

■

On some models, has a delay start Self-Clean cycle been 
set? See “Self-Cleaning Cycle” section.

■

Has a delay start been set? See “Timed Cooking” section.

■

Is the appliance level? Level the appliance. See the 
Installation Instructions.

■

Is the proper temperature set? Double-check the recipe in 
a reliable cookbook.

■

Is the proper oven temperature calibration set? See “Oven 
Temperature Calibration - Option 6” section.

■

Was the oven preheated? See “Bake,” “Broil,” “Easy 
Convect Conversion,” “Convection Bake,” “Convection 
Roast” or “Convection Broil” section.

■

Is the proper bakeware being used? See “Bakeware” 
section.