KitchenAid KDRU763 用户手册

■

Glass cleaner and a soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682 
(not included):

See “Assistance or Service” section to order.

■

Self-Cleaning cycle:

For optimal door cleaning result, wipe away any deposits with 
a damp sponge before running cycle.

Activate the Control Lock to avoid touch screen activation during 
cleaning. See “Control Lock” section.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682
(not included):

See “Assistance or Service” section to order.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle: 

See “Self-Cleaning Cycle” first. Remove racks or they will 
discolor and become harder to slide. If this happens, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

■

Steel-wool pad

Clean the griddle shortly after removing food and the griddle has 
cooled down.

■

Hot, soapy water and/or nylon scrub pad

■

After cleaning dry surface with a paper towel

Allow cooktop to cool completely before cleaning.

■

Warm, soapy water or nonabrasive cleanser.

■

Damp cloth or nonabrasive pad.

■

Dry completely before placing drip tray in position.

The oven lights are 120-volt, 25-watt maximum halogen bulbs. 
They will come on when the oven door is opened. 

On 48" (121.9 cm) ranges, both the left and right oven lights 
will come on when either door is opened. The oven lights will 
not work during the Self-Cleaning cycle. When the oven door is 
closed, touch OVEN LIGHT to turn light on or off.

Before replacing the bulb, make sure the oven is off and cool.

1. Disconnect power.

2. Remove glass light cover by grasping the front edge and 

pulling away from oven.

3. Remove bulb from socket.

4. Replace bulb, using tissue or wearing cotton gloves to handle 

bulb. To avoid damage or decreasing the life of the new bulb, 
do not touch bulb with bare fingers. 

5. Replace bulb cover by snapping back into wall.

6. Reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.