Smeg DUCO4SS 用户手册

 

 

22 

 

 

1.  Remove all accessories from the oven; 
2.  Remove the side grilles (fig.1); 
3.  Extract the side liners “C” and “D”(fig. 2); 
4.  Remove the back panel “A” after undoing the threaded ring-nut “B” (fig. 2). 
5.  Reassemble the panels, restoring them to their original position. 

 

 

 

1.  Remove all accessories from the oven; 
2.  Remove the side runners and self-cleaning liner together by lifting out the pin A and extracting the 

runners from the holes B on the bottom of the oven (fig.1); 

3.  Separate the self-cleaning liner from the runners by removing the runner pin from the slot in the 

liner (Point C in fig. 2) and extracting the two runner pins from the holes in the bottom of the liner 
(Point D of fig. 2); 

4.  Remove the liner which rests on the bottom of the oven by unscrewing the screw E and removing it 

from the fixing pin (fig. 3). 

5.  Reassemble the panels, restoring them to their original position. 

 

 

With the door completely open, lift the levers A until they touch the hinges B and take hold of the two 
sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and 
remove it. If the hinges have not locked, repeat the operation, raising the levers and keeping the door 
slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, 
ensuring that it remains fitted into the grooves C.