Smeg ALFA135BM 用户手册
Instructions for the user
30
6. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts
subject to wear such as seals, bulbs, and so on. The following
instructions describe how to carry out these minor maintenance
operations.
subject to wear such as seals, bulbs, and so on. The following
instructions describe how to carry out these minor maintenance
operations.
Before any intervention, disconnect the power supply of the oven.
6.1 Replacing the light bulb
Remove protection cover A using a screwdriver
to pry open. Replace bulb B with a similar one.
Remount protection cover A.
to pry open. Replace bulb B with a similar one.
Remount protection cover A.
Use only oven light bulbs (suitable for a temperature of up to
300°C).
6.2 Removing the door
Open the door completely and insert the
pins (supplied) into the holes from the
inside. Close the door to an angle of about
45° and lift it off. To reassemble, fit the
hinges into their grooves, then lower the
door into place and extract the pins.
pins (supplied) into the holes from the
inside. Close the door to an angle of about
45° and lift it off. To reassemble, fit the
hinges into their grooves, then lower the
door into place and extract the pins.
6.3 Oven door seal
To permit thorough cleaning of the oven, the seal may be
removed. Before removing the seal, take off the door as
described above. Once the door has been taken off, lift the
tabs at the corners as shown in the figure.
removed. Before removing the seal, take off the door as
described above. Once the door has been taken off, lift the
tabs at the corners as shown in the figure.