3M 3125 用户手册

b. OPERATING INSTRUCTION

At work

-  Check to see that the workplace is in order and is appropriate for the work.
-  Inspect for loose parts.
-  Confirm the proper air pressure (0.4 to 0.65 MPa)
-  Tighten all couplings securely so that they will not be loosened by vibration.

Attach buffing material or paper by pressing it uniformly with the palm of hand to attach it
securely.

Speed control

Valve lever

Pad

Skirt

Starting and stopping

- The tool starts when the valve lever is pressed lightly. It stops when the lever is

released.

- Operate the lever as the abrasive contacts the surface to be polished. When the tool is

transported, be sure to remove the air hose.

During use

- The tool can be adjusted continuously from low to high speed by the speed control.

Adjust it according to the work.

- Do not press it onto the surface to be polished with excess force. This does not

increase efficiency, but it shortens tool life.

Speed control

After use

⋅Apply spindle oil to the air supply opening and operate the tool at low speed. After use,
be sure to remove the air hose and store the tool in a safe, dry place.