Fujitsu M3093DE 用户手册
4 – 2
4.2
Reading a Document in Flatbed Mode
This section explains how to read a document placed on the document
bed.
bed.
WARNING:
Do not lock directly at the light source during read
operation.
4.2.1
Reading a standard-size document
If the size of the document is smaller than the document bed, read the
document using the following procedure:
document using the following procedure:
①
Open the document cover.
②
Place the document face down on the document board. Correct
any curled or folded parts of the document.
any curled or folded parts of the document.
③
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
portrait mode) of the document to the left side of the document
bed.
④
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done correctly.
document is not placed correctly, reading cannot be done correctly.
⑤
Close the document cover slowly. If the document cover is closed
too quickly, the document may move.
too quickly, the document may move.
⑥
Instruct the scanner to start scanning from the host computer. Do
not press on or open the document cover during the read operation.
not press on or open the document cover during the read operation.
⑦
After reading, open the document cover to remove the document.
Portrait mode
Landscape mode
Document
Document bed
Left side of the document bed
③
Long side
Short side
③