GE 82-POE 用户手册

 

Chapter 5: Console Management 

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 

143 

 

If you are not familiar with console command or the related parameter, enter 

"help" anytime in console to get the help description. 

You can change these settings, if desired, after you log on. This management method 
is often preferred because you can remain connected and monitor the system during 
system reboots. Also, certain error messages are sent to the serial port, regardless of 
the interface through which the associated action was initiated. A Macintosh or PC 
attachment can use any terminal-emulation program for connecting to the terminal 
serial port. A workstation attachment under UNIX can use an emulator such as TIP. 

The following table lists the CLI commands and description. 
 

Begin a session with 
your switch. 

Enter logout or 
quit. 

The user commands 
available at the user 
level are a subset of 
those available at the 
privileged level. 

Use this mode to: 

• Perform basic tests. 

• Display system 
information. 

Enter the enable 
command while in 
User EXEC mode. 

Enter disable to 
exit. 

The privileged 
command is the 
advanced mode. 

Use this mode to 

• Display advanced 
function status 

• Save configuration 

Enter the configure 
command while in 
privileged EXEC 
mode. 

To exit to 
privileged EXEC 
mode, enter exit 
or end 

Use this mode to 
configure those 
parameters that are 
going to be applied to 
your switch.