GE 82-POE 用户手册
Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
89
The following are the user-configurable STP parameters for the port or port group
level:
level:
PARAMETER DESCRIPTION DEFAULT
VALUE
Port Priority
A relative priority for each switch - lower numbers give a
higher priority and a greater chance of a given switch being
elected as the root bridge.
higher priority and a greater chance of a given switch being
elected as the root bridge.
128
Port Cost
A value used by STP to evaluate paths - STP calculates path
costs and selects the path with the minimum cost as the
active path.
costs and selects the path with the minimum cost as the
active path.
200,000-100Mbps
Fast Ethernet ports
Fast Ethernet ports
20,000-1000Mbps
Gigabit Ethernet ports
Gigabit Ethernet ports
0 - Auto
Default Spanning-Tree Configuration
Feature
Default Value
Enable state
STP disabled for all ports
Port priority
128
Port cost
0
Bridge Priority
32,768
NOTE:
The Hello Time cannot be longer than the Max. Age. Otherwise, a configuration
error will occur.
Observe the following formulas when setting the above parameters:
• Max. Age _ 2 x (Forward Delay - 1 second)
• Max. Age _ 2 x (Hello Time + 1 second)
• Max. Age _ 2 x (Forward Delay - 1 second)
• Max. Age _ 2 x (Hello Time + 1 second)
RSTP System Configuration
This section provides RSTP-System Configuration from the Switch, the screen in
Figure 61 appears.
• The user can view spanning tree information of Root Bridge.
• The user can modify RSTP state. After modification, click the Apply button.
Figure 61 appears.
• The user can view spanning tree information of Root Bridge.
• The user can modify RSTP state. After modification, click the Apply button.