Sony VPL-EX70 用户手册
48
Specifications
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, Positive/negative
VD: Vertical sync input: TTL
level, positive/negative
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, Positive/negative
VD: Vertical sync input: TTL
level, positive/negative
AUDIO INPUT
Stereo minijack, 500 mVrms,
input impedance 47 Kilohms or
more
more
OUTPUT
MONITOR OUT: HD D-sub15-
pin (female)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms or less
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms or less
REMOTE (VPL-EX70/EX7 only)
RS-232C: D-sub 9 pin
General
Dimensions
314 × 109 × 269 mm (12
3
/
8
×
4
3
/
8
× 10
5
/
8
inches) (w/h/d)
(without projecting parts)
Mass
VPL-EX70:
Approx. 3.0 kg (6 lb 10 oz)
VPL-EX7/ES7:
Approx. 2.9 kg (6 lb 6 oz)
Power requirements
VPL-EX70/EX7: AC 100 to 240
V, 2.6 to 1.1 A, 50/60 Hz
VPL-ES7: AC 100 to 240 V, 2.4 to
1.0 A, 50/60 Hz
Power consumption
VPL-EX70/EX7: Max.260 W (in
standby: 3 W)
VPL-ES7: Max.240 W (in
standby: 3 W)
Heat dissipation
884 BTU (VPL-EX70/EX7)
816 BTU (VPL-ES7)
816 BTU (VPL-ES7)
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Lithium battery CR2025 (1)
Lithium battery CR2025 (1)
HD D-sub 15 pin cable (1.8 m) (1)
(1-832-428-11, SONY)
Carrying case (1)
AC power cord (1)
Lens cap (1)
Operating Instructions (CD-ROM)
AC power cord (1)
Lens cap (1)
Operating Instructions (CD-ROM)
(1)
Quick Reference Manual (1)
Safety Regulations (1)
Security Label (1)
Safety Regulations (1)
Security Label (1)
Design and specifications are subject to change
without notice.
without notice.
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Optional accessories
Projector Lamp
LMP-E191 (for replacement)
Some of the items may not be available in
some areas. For details, please consult your
nearest Sony dealer.
some areas. For details, please consult your
nearest Sony dealer.
Note