Toshiba PBM-501L 产品宣传页
Step 3
Raise the projector with the mounting bracket attached and slip through the hinge pin slot openings
On the bracket into the base box. Install the two hinge pin bolts loosely and four angle locking bolts. Adjust
the angle and lock it, Then tighten the hinge pin bolts. (see detail below).
Step 4
Check all the hardware for proper tightness and security.
WARNING!
WARNING!
The ceiling should be capable of supporting a weight of at least five times the projector or monitor
weight. If it cannot, the ceiling must be reinforced. Proper installation procedure by qualified personnel
as outline. In the installation instructions must be adhered to. Failure to do so could result in serious
personal injury.
weight. If it cannot, the ceiling must be reinforced. Proper installation procedure by qualified personnel
as outline. In the installation instructions must be adhered to. Failure to do so could result in serious
personal injury.
For further information or ordering assistance contact us at the address shown on the front of this page.