TP-LINK 1910010350 用户手册

 

-43- 

has been terminated due to inactivity, Connect on Demand enables the Router to 

automatically re-establish your connection as soon as you attempt to access the Internet 

again. If you wish to activate Connect on Demand, click the radio button. If you want your 

Internet connection to remain active at all times, enter 0 in the Max Idle Time field. 

Otherwise, enter the number of minutes you want to have elapsed before your Internet 

connection terminates. 

¾

 

Connect Automatically - Connect automatically after the Router is disconnected. To use 

this option, click the radio button. 

¾

 

Connect Manually - You can configure the Router to make it connect or disconnect 

manually. After a specified period of inactivity (Max Idle Time), the Router will disconnect 

from your Internet connection, and you will not be able to re-establish your connection 

automatically as soon as you attempt to access the Internet again. To use this option, click 

the radio button. If you want your Internet connection to remain active at all times, enter "0" 

in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have 

the Internet connecting last unless a new link is requested. 

Caution: Sometimes the connection cannot be disconnected although you specify a time to 

Max Idle Time, since some applications are visiting the Internet continually in the 

background. 

) 

If you don't know how to choose the appropriate connection type, click the Detect  button to 

allow the Router to automatically search your Internet connection for servers and protocols. The 

connection type will be reported when an active Internet service is successfully detected by the 

Router. This report is for your reference only. To make sure the connection type your ISP 

provides, please refer to the ISP. The various types of Internet connections that the Router can 

detect are as follows: 

z

 

PPPoE - Connections which use PPPoE that requires a user name and password.   

z

 

Dynamic IP - Connections which use dynamic IP address assignment.   

z

 

Static IP - Connections which use static IP address assignment. 

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses 
one of these protocols, then you must configure your connection manually. 

Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on 

the screen below, Figure 4-19: