IBM Dock I 用户手册
6.
Follow instructions on the
screen to install the CD-ROM
device driver.
screen to install the CD-ROM
device driver.
PLAYCD Utility
The PLAYCD utility
program is not installed
during this installation
procedure. The
PLAYCD.EXE and
CDPLAY.HLP files are
available on the CD-ROM
Option/Device Driver
Diskette. If these files are
needed, use the OS/2 COPY
command to copy the
individual files from the
option diskette.
program is not installed
during this installation
procedure. The
PLAYCD.EXE and
CDPLAY.HLP files are
available on the CD-ROM
Option/Device Driver
Diskette. If these files are
needed, use the OS/2 COPY
command to copy the
individual files from the
option diskette.
Now installation is complete.
Using the SCSI Diagnostics Utility
This section explains how to prepare your hard disk drives for use
with your computer system and how to identify the problems with
the SCSI diagnostics utility (FDSDA.EXE).
with your computer system and how to identify the problems with
the SCSI diagnostics utility (FDSDA.EXE).
Preparing SCSI Drives
If your SCSI drive has been used previously in another system
configuration, it is advisable to run a low-level format first with
the SCSI diagnostics utility.
the SCSI diagnostics utility.
Then run your IBM DOS or OS/2 FDISK and FORMAT utilities
to partition and format the drives in accordance with your IBM
DOS or OS/2 documentation.
to partition and format the drives in accordance with your IBM
DOS or OS/2 documentation.
The low-level format prepares a drive to work with an
operating system. It also scans the disk surface and builds a
defect list to relocate any defective sectors to a known good area
of the disk.
operating system. It also scans the disk surface and builds a
defect list to relocate any defective sectors to a known good area
of the disk.
5-20
IBM ThinkPad Dock I User’s Guide
Title: C74AMST CreationDate: 06/23/93 17:09:07