Vermont Casting DVT38S2 用户手册

27

CAUTION: Allow fireplace to cool if it has been 
in operation.
Trim components: 2 each, top frame assembly, 
bottom trim assembly, right and left trim assem-
blies.
NOTE: Only one trim set is used when Vista Door 
is installed.
NOTE: Place trim pieces with magnets facing 
window frame.
1.  Place bottom trim on the bottom of the window 

frame. NOTE: Final adjustments will be made 
once all trim pieces are in place.

2.  The right and left trim piece have a 45° notch 

on the back corner of the top end. (Fig. 56) 
Place the right trim against the right side of the 
window frame, making sure the bottom is over-
lapping the bottom trim piece. The right side 
of the trim should butt up against the right side 
nailing flange of the fireplace.

3.  Place the left trim on the left side of the window 

frame as in Step 2.

4.  Place the top trim piece so the ends overlap 

both the right and left side trim pieces.

5.  Adjust the top trim so the top butts up against 

the top nailing flange and the sides are butted 
up against the side nailing flanges and the top 
trim. Once the top trims are in place, move the 
bottom trim up until it fits securely with the bot-
tom of the side trims.

6.  Repeat steps for other side of fireplace.

Left and Right Trim,

 45° Notch on Top End

KT601

Fig. 56  The right and left trim pieces have a 45° notch on the 
back corner of the top end when properly installed.

�����
�������������
����

Nailing Flange

Trim

KT602

Fig. 57  Trim frame in place.