Bodyline Products International 216FD 用户手册

To reset the camera to the original factory default settings, go to the System Options > 

Maintenance web page (as described in Maintenance, on page 44) or use the Control 

button on the underside of the camera (see page 8) as described below:

Using the Control Button
To reset the camera to the factory default settings using the Control Button:

Scripting is an advanced function that provides the possibility to customize and use 

scripts. This function is a very powerful tool. 

Improper use may cause unexpected behavior or even cause loss of contact with the 

unit. If a script does cause problems, reset the unit to its factory default settings. A 

backup file may be of use to return the unit to its latest configuration. 

 
Axis strongly recommends that you do not use this function unless you fully 

understand the consequences. Note that Axis support does not provide assistance for 

problems with customized scripts. 

For more information, please visit the Developer pages at www.axis.com/developer

Plain Config - this function is for the advanced user with experience of Axis network 

camera configuration. All parameters can be set and modified from this page. Help is 

available from the standard help pages.

1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator color changes to amber 

(this may take up to 15 seconds).

4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the 

process is complete and the camera has been reset. The unit will now have the 

default IP address 192.168.0.90