JAI AD-081GE 用户手册
AD-081GE
52
10.5.3 Pulse Width Control (PWC) trigger mode
In this mode the accumulation time is equal to the trigger pulse width. Here it is possible to
have a long time exposure. The maximum recommended time is <60 frames.
The accumulation is only LVAL async.
For timing details, refer to fig. 35 through fig. 40 and fig. 45 through fig.46.
In this mode the accumulation time is equal to the trigger pulse width. Here it is possible to
have a long time exposure. The maximum recommended time is <60 frames.
The accumulation is only LVAL async.
For timing details, refer to fig. 35 through fig. 40 and fig. 45 through fig.46.
To use this mode:
Set function:
Set function:
Trigger mode
Pulse Width Control (PWC)
Readout mode
Sync, async,
Output Select
8-bit, 10-bit, 12-bit
Scanning
Full/Partial
Vertical binning
ON/OFF
Accumulation
LVAL async
Other functions
Input:
External Trigger
GigE I/F, Hirose 12-pin,Hirose 6-pin
Important Note:
1 The minimum duration of the trigger is 2L. The minimum period of trigger is as follows.
1 The minimum duration of the trigger is 2L. The minimum period of trigger is as follows.
Sync mode:
Sync
Sync
Smearless OFF
Exposure time + 792L + 3L
Smearless ON
Exposure time( Min:199L+2L) + 792L + 2L
Sync mode:
Async
Async
Smearless OFF
Exposure time + 792L + 3L
Smearless ON
Exposure time( Min:199L+2L) + 792L + 3L
FVAL(792L) is the FVAL period of continuous operation.
Fig.45 Pulse Width Control LVAL asynchronous