Samsung SV-5000W 用户手册
Setting the RF OUT CHANNEL
The initial setting of RF Channel is 60CH.
You can select the RF OUT CHANNEL for watching the VCR by TV
channel.
You can select the RF OUT CHANNEL for watching the VCR by TV
channel.
1
Press MENU on the remote control.
Result:
Result:
The programming menu is displayed.
2
Press the
or
buttons to select installation.
Result:
The installation menu is displayed.
3
Press the
or
buttons to select
MANUAL SET UP
.
Result:
The
MANUAL SET UP
menu is displayed.
4
Press the
button until the cursor is placed in front of
RF OUT
CHANNEL
.
5
Press the
or
buttons to change the RF OUT CHANNEL.
Result:
The
RF OUT CH
is changed.
➢
Your VCR RF out channel may need to be changed if the
pictures suffer from interference or your TV can not find
the pictures.
You can connect your VCR to the TV using the RCA or
Scart cable if the appropriate input is available on the TV
for better quality sound and picture.
pictures suffer from interference or your TV can not find
the pictures.
You can connect your VCR to the TV using the RCA or
Scart cable if the appropriate input is available on the TV
for better quality sound and picture.
GB
18
19
GB
Presetting the Stations Automatically
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ automatically ; or
◆ manually (see page 20).
◆ manually (see page 20).
1
Press MENU on the remote control.
Result:
Result:
The programming menu is displayed.
2
Press the corresponding
or
buttons, until the cursor is placed
in front of the
INSTALLATION
option.
3
Press the
button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is placed
in front of the
AUTO SET UP
option.
5
Press the
button to select
AUTO SET UP
.
6
Press OK to start the auto scanning.
Result:
Result:
◆
The
AUTO
indication flashes on the VCR display.
◆
The first frequency band is scanned and the first
station found is displayed and stored.
station found is displayed and stored.
◆
The VCR then searches for the second station and
so on.
so on.
◆
When the automatic scanning procedure has
finished, the VCR switches automatically to
programme 1.
finished, the VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the VCR
depends on the number of stations that it has found
(reception conditions, etc).
depends on the number of stations that it has found
(reception conditions, etc).
7
To exit the AUTO SET UP, press the MENU.
➢
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically.
In this case, they should be set manually (see page 15).
occurs, the time and date may not be set automatically.
In this case, they should be set manually (see page 15).
EUROPE
U.K.
YOUR DATA WILL BE LOST
PRESS (OK) TO CONTINUE
(MENU) TO EXIT
AUTO SET UP
PLEASE WAIT
CH 2
END:(MENU)
AUTO MENU
V
F
OK
T
R
AC
KI
NG
SLO
W
** INSTALLATION **
COUNTRY
❿
AUTO SET UP
MANUAL SET UP
MANUAL SET UP
#
❷
❿
END:(MENU)
1
** INSTALLATION **
COUNTRY
AUTO SET UP
AUTO SET UP
❿
MANUAL SET UP
#
❷
❿
END:(MENU)
** MANUAL SETUP **
TV STATION TABLE
MANUAL TUNING
RF OUT M/G/I/K/L :I
MANUAL TUNING
RF OUT M/G/I/K/L :I
❿
RF OUT CH 21-69 :60
#
❷
❿
END:(MENU)