Samsung SV-5000W 用户手册
GB
29
GB
28
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press MENU on the remote control.
Result:
Result:
The programming menu is displayed.
2
Press the corresponding
or
buttons, until the cursor is
placed in front of the
USER SET
option.
3
Press the ,
button to select user set2 page.
Result:
The
USER SET2
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed in front of the
NICAM
option.
5
To...
Press or ,
until...
Mono mode
OFF
is displayed.
OFF: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode
ON
is displayed.
ON: Normally set at this position.
6
On completion, press MENU twice to exit the menu.
➢
NICAM is the stereo broadcast system of some countries.
(Ex.: U.K., SPAIN, --)
(Ex.: U.K., SPAIN, --)
➢
If the stereo broadcast system of your country is not
NICAM, the SV-5000W can not receive NICAM.
NICAM, the SV-5000W can not receive NICAM.
** USER SET1 **
TAPE SELECT
:E180/
T120
CLOCK TYPE :24H
PLAY SYSTEM
PLAY SYSTEM
:AUTO
OSD
:ON
❿
USER SET2
#
❷
❿
END:(MENU)
** USER SET2 **
❿
NICAM
:ON
COLOR
:ON
BLUE SCREEN
:ON
SQPB
:OFF
USER SET1
#
❷
❿
END:(MENU)
Modifying VIDEOPLUS+/SHOWVIEW Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press MENU a second time to confirm.
you can do so before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
or
buttons, until the
PR
selection flashes.
than the tuner (L1, L2, AV input)
◆
Press the INPUT button one or more times to change the
input source selection.
Result:
input source selection.
Result:
The programme number is replaced by:
➢
The input source must be selected before changing any other
value.
value.
Record a programme every day
◆
Press the
or
buttons, until the
DAY
selection flashes.
(Monday to Sunday) at the same time
◆
Press the
or
buttons, until the
DLY
(Daily) value is
displayed.
Record a programme every week
◆
Press the
or
buttons, until the
DAY
selection flashes.
on the same day and at the same time
◆
Press the
or
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
Example:
W-SA
(Weekly Saturday)
Extend the recording time
◆
Press the
or
buttons, until the
STOP
selection flashes.
◆
Press the
or
buttons to increase or decrease the stop
time.
Select the recording speed
◆
Press the
or
buttons, until the recording speed selection
flashes.
◆
Press the
or
buttons until the correct indication is
displayed:
•
AUTO
(Auto Tape Speed Select)
•
SP
(Standard Play)
•
LP
(Long Play)
•
SLP
(Super Long Play)
Select the VPS/PDC recording
◆
Press the
or
buttons, until the V/P selection flashes.
◆
Press the
or
buttons until the “ON” indication is
display.
☛
Do not select VPS/PDC unless you are sure the programme
you wish to record is broadcast with VPS/PDC. If you do set
VPS/PDC ON (by selecting “ON” in the right - hand column on
the screen), then you must set up the start-time EXACTLY
according to the published TV schedule. Otherwise the timer
recording won’t take place.
you wish to record is broadcast with VPS/PDC. If you do set
VPS/PDC ON (by selecting “ON” in the right - hand column on
the screen), then you must set up the start-time EXACTLY
according to the published TV schedule. Otherwise the timer
recording won’t take place.