3com 09-1632-000 用户手册

■

■

■

If your network uses the IP protocol, use the 
procedure in “Configuring IP Network Addressing” 
on page 20.

■

If your network uses the IPX network protocol use 
the procedure in “Configuring IPX Network 
Addressing” on page 23.

■

Additional configuration steps that need to be 
performed at Office B are included in “Configuring PPP 
Authentication” on page 24. To complete your set up, 
you will need to exchange certain information with your 
Office B partners.

If you are in North America, you can use the SPIDWizard to 
automatically detect your ISDN switch type and SPID 
values. 

To configure your Office A in North America, follow these 
steps:

1 Configure ISDN Dial on Demand.

In this procedure you will set the primary and secondary 
phone numbers as provided by your telecommunications 
carrier for the ISDN paths. 

a In the navigation frame, click the Configuration link.

b In the navigation frame, click the IP Routing link.

c In the Dial on Demand ISDN Setup section of the 

navigation frame, click the PATH LocalDialNo link.

d In the start field, click the arrow and choose 2.1.

e In the LocalDialNo field, enter the local dial number 

string in quotes. For example, enter:

f Click Apply.

OC10.book  Page 13  Thursday, May 13, 1999  2:33 PM