3M 6700-62.5 SC 62.5 m MM 250/900 m 用户手册

78-0013-1746-6-E

1.3

Additional materials needed:

• De-ionized or distilled water for nano-finishing at

above-freezing temperatures

• 25% to 35% methanol by volume and 75% to

65% de-ionized or distilled water solution by

volume for nano-finishing at below-freezing

temperatures. DO NOT use ethanol or isopropyl

alcohol for nano-finishing.

• 99% pure isopropyl alcohol (for cleaning only) or

a fiber optic connector cleaning solution approved

by your company.

Note: Carefully follow safety, health and environmental

information given on product labels or the Material

Safety Data Sheets for isopropyl alcohol, fiber optic

cleaning fluid, and/or methanol/water solution.

1.4

Optional accessory:

™

200X View Scope 6365-VS. DO NOT use when

connectors are illuminated by a laser source.

2.0 Connector and Protrusion Setting Tool Preparation

2.1

On the 3M

™

Protrusion Setting Tool, move the

actuator lever to the unactivated position as shown.

2.2

Clean the tip of the protrusion setting jig using a lint-free cleaning swab with a drop of alcohol or cleaning fluid.

Reach through the window with the swab and move the swap tip vertically to clean the jig tip.

wipe jig tip with vertical motion