Toshiba Digital Business Telephone Solutions 用户手册
Strata CT ACD Supervisor November 2001
19
Features
Night Transfer
Night Transfer
Incoming calls to your group can be routed to different destinations, based on either two- or three-call
routing (ringing) patterns which are set in system programming. The Night Transfer LED indicates
the active routing pattern:
Up to four Night Transfer (
Night Transfer
) and Tenant Night Transfer (
Night Transfer 1~4
)
buttons can be assigned and controlled independently. Check with the System Administrator for any
additional information.
➤
To enable/disable Night Transfer
Three-Pattern
Two-Pattern
DAY
OFF
OFF
DAY 2
FLASH
N/A
NIGHT
ON
ON
➤
Press
Night Transfer
to
toggle Night Transfer
ON/OFF (two-ring pattern)
The Night Transfer LED is ON if you are programmed for a
two-ring pattern.
...or, if your system is
programmed for three-ring
patterns, the LED will flash
instead. Press
Night Transfer
,
again (three-ring pattern), to
activate Night Mode.
You are in Day2 Mode. The LED indicators for three-ring
patterns are: Night Mode (LED is ON); Day Mode (LED is
OFF; and Day2 Mode (LED is flashing).
The Night Transfer LED is ON.
The Night Transfer LED is ON.