Snom VoIP Phone 用户手册

Settings 

 

58

 

snom phones subscribe to the status information of SIP URL's mapped 

as “Destination” on the programmable keys.  By turning this setting on, 
the user will be offered a pickup if a mapped destination gets a call and 

is in the ringing state.  The display will change in the idle state to show 
the source and destination of that call and the user can pick it up by 
pressing the ENTER key  

.  The pickup offer will be available as long 

as the destination is ringing and disappear when the user of the phone 
offering pickup presses CANCEL 

, when the call is connected, when 

the call is cancelled by the caller, or when a third party picks up the call. 

You can enable or disable the CWI on the phone through this setting. 

Turning this setting on will produce a dial tone when a call is being held 
and the user is trying to dial a second number.  A dial tone will not be 

played when this setting is not turned on. 

Sometimes it is useful to disable the disconnection of a call when the 
handset is placed on-hook, e.g., during conference calls or handsfree 

mode, etc.  This can be achieved by turning this setting off. 
 
Keys 
 
Here you can change the key behaviour on the phone to your wishes. 
The web page may look like this: 
 

 

The “Break” key on the phone can be used either to disconnect the 
connected call or as a “Transfer” hard key.  You can make that choice 

through this setting. 

In case the transfer feature triggered by on-hook is confusing you, you 
can switch it off here.