Toshiba 24V4210U 用户手册
108
Using the TV’s features
No Signal Power Down
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected.
signal is detected.
❖
You can change the setting to Off for the following functions:
❖
Low signal strength of an analog channel (no signal detection)
❖
Only Audio L/R is connected to external input to listen to
music through the TV speakers.
music through the TV speakers.
1
From the Preferences menu, highlight Energy Saving
Settings, and then press the OK button.
Settings, and then press the OK button.
2
Press the ( / arrow) buttons to select No Signal Power
Down, and then press the OK button.
Down, and then press the OK button.
3
Press the ( / arrow) buttons to highlight the item you wish
to change, and then press the ( / arrow) buttons to select
On/Off.
to change, and then press the ( / arrow) buttons to select
On/Off.
❖
Default setting for each input is On.
❖
A warning message appears approximately 1 minute before the
TV turns Off.
TV turns Off.
Using HDMI® CEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI® CEC compatible devices from the TV
remote control via an HDMI
control Toshiba HDMI® CEC compatible devices from the TV
remote control via an HDMI
®
connection.
When the Enable HDMI® CEC in the HDMI® CEC Setup menu is
set to On, the following HDMI® CEC functions are enabled.
set to On, the following HDMI® CEC functions are enabled.
HDMI® CEC playback device (DVD player, etc.) control
With your TV’s remote control, or using the HDMI® CEC Player
Control menu, you can control the connected HDMI® CEC
playback device you are watching.
Control menu, you can control the connected HDMI® CEC
playback device you are watching.
Available remote control key functions:
Button:
Description:
PLAY
Begin playback
STOP
Stop playback
PAUSE
Pause the picture during play or record mode
SKIP Forward
Skip Forward
NOTE