Toshiba D-R17DTKB 用户手册
12
EN
Rear Panel
1 ANTENNA IN (DVB-T)
• Connect to an antenna or cable to receive
DVB-T signal.
2 ANTENNA OUT (DVB-T)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system to output the signal
received at ANTENNA IN (DVB-T). Use the
supplied RF cable.
received at ANTENNA IN (DVB-T). Use the
supplied RF cable.
3 ANTENNA IN (ANALOG)
• Connect to an antenna or cable to receive
analogue signal.
4 ANTENNA OUT (ANALOG)
• Connect to the Aerial jack on your TV, cable box
or direct broadcast system to output the signal
received at ANTENNA IN (ANALOG). Use the
supplied RF cable.
received at ANTENNA IN (ANALOG). Use the
supplied RF cable.
5 COMPONENT VIDEO OUTPUT jacks
• Connect to the component video input jacks on
your TV.
• Use a commercially available Component Video
cable.
6 ANALOG AUDIO OUT jacks
• Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
7 DIGITAL AUDIO OUTPUT (COAXIAL) jack
• Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder, DTS decoder
or MPEG decoder. Use a commercially
available Coaxial cable.
or MPEG decoder. Use a commercially
available Coaxial cable.
8 AV2 (DECODER) socket
• Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
available Scart cable.
9 HDMI OUT jack
• Connect to a display with an HDMI compatible
port.
• Use a commercially available HDMI cable.
10 AV1 (TV) socket
• Connect to the Scart socket on your TV. Use a
commercially available Scart cable.
11 Mains cable
• Connect to a standard AC outlet.
Note
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
• This unit does not have an RF modulator.
AV2 (DECODER)
AV1 (TV)
ANALOG
AUDIO OUT
COMPONENT
VIDEO OUTPUT
ANALOG
DVB-T
OUT
IN
ANTENNA
P
B
/C
B
P
R
/C
R
Y
L
R
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
HDMI OUT
1
3 4
2
5
6 7
9
11
8
10
E7J70BD_EN.book Page 12 Monday, May 7, 2007 3:31 PM