Toshiba IPedge IP Telephone 用户手册

IPedge
Web-based User Administration

222

•

Station and System Speed Dial index numbers can be entered. 
The Speed Dial index number will automatically dial out on the 
extension or Line programmed on the One Touch button with the 
associated Speed Dial index number.

•

Function buttons, except One Touch or a 

Program button.

•

Handset hooking (on-hook/off-hook) cannot be recorded.

4. Enter the key strip label, eg., Engineering Conference, Cell, etc. This 

label will display on your telephone.

5. Click OK, then the Save icon to save the entry.

To create a One Touch for Park and Page under one button, program the 
following sequence under the One Touch button.

 – puts the caller on hold and gets new dial tone.

 – code to park call

 – this special character outputs a single * which will select an available 

orbit and display the selected orbit on the phone.

 – This special character is a Stop. The dial string pauses and 

enables the user to view the selected orbit on the display. The dial string will 
restart from this point when the One Touch button is pressed again.

 – gets new dial tone on the PDN

 – code for All Call Page which allows the user to page the location of the 

orbited call.

On your telephone, press the labeled One Touch button.

+ 

Indicates “stop.” The One Touch button blinks rapidly and stops the delivery of 
the remaining digits in the string until it is pressed again. Multiple “stops” can be 
programmed into one string.

Pause (1~9) seconds. If you need to pause longer than nine seconds, enter 
additional pause escape sequences. For example, to insert a 17-second pause, 
enter 

. The display of a pause in the Speed Dial Number shows a “P” 

without specifying the duration. In this example, you would see “PP.”