Toshiba IPedge IP Telephone 用户手册

下载
页码 238
IPedge
The Basics
22
TOSHIBA
IPedge UG    06/11
6. FB3, LED Off: Normal sensitivity
7. Press 
Hold to set the option.
8. Go off-hook, then on-hook to exit the program mode.
Telephone 
Terminology
When making or receiving calls on your IP5000-series telephone you may 
experience one or more of the following call features depending on how your 
telephone is configured.
Line
 – is synonymous with trunk which is the line that connects you to the 
PSTN (Public Switched Telephone Network). Line can be:
a button on your telephone set designated for outgoing calls 
your DN button followed by dialing 9.
Automatic Line Selection (ALS) –
 ALS is engaged on outgoing calls. 
Lift the handset or press 
Spkr to hear dial tone, the steady green Line 
LED indicates ALS in enabled. The second line of the LCD will display the 
method of dialing available, followed by the digits dialed. 
Ringing Line Preference –
 Answer any incoming call by lifting the 
handset or pressing 
Spkr. There is no need to press the ringing line 
button to answer the call when ringing line preference is enabled.
Tone First Signaling –
 Internal incoming calls only: telephone rings in 
standard ring tone, lift handset or press 
Spkr to answer call.
Voice First Signaling –
 Internal incoming calls only: a long tone is heard, 
followed by the caller's voice, this will automatically engage the 
Spkr to 
allow for hands free communications. Lift the handset if desired (for 
privacy). When Voice First Signaling is enabled the telephone does not 
ring on internal incoming calls. 
Hot Dialing –
 Dial a telephone number from the dialpad, the telephone 
automatically selects a line, shown with a green LED, and turns on the 
Spkr and Mic LED's. When Hot Dialing is not turned on the handset 
should be lifted or Sprk should be pressed in order to make a call.