Toshiba IPedge IP Telephone 用户手册

IPedge
Feature Operations

40

The Alarm Notification Button must be set up by your System Administrator 
on your station.

Call your System Administrator.

This button stops displaying when the alarm clears or when you press the 
flashing button. If the alarm has not been cleared the Alarm Notification 
Button flashes every 10 minutes.

When you reach a busy station, you can set Automatic Callback to have the 
system monitor the busy extension and notify you when it becomes idle. 

Automatic Callback can place you in queue for an available outside line, if you 
reach a line group in which all lines are busy. When a station or line becomes 
available, the system rings your telephone; when you answer the system 
automatically rings the intended destination. The amount of time the system 
will wait for an idle destination is set in system programming. Automatic 
Callback is also known as “CO Line Queuing.”

1. If you hear a busy tone after dialing an outside line access code or a 

station number, press 

Auto Callback or 4. Busy tone stops, followed by 

success tone, then busy tone resumes.

2. Hang up. You can make other calls while waiting. 

3. When the called station or outside line becomes idle, your telephone rings 

and you will see a fast flashing LED.

•

If you called a busy station, the extension LED flashes green 
(incoming call) and the called number displays.

•

If you called a busy outside line, the extension LED flashes green 
(incoming call rate). The seized line’s number displays.

4. Answer within about three rings (can be programmed to ring up to three 

minutes) to prevent the callback from being cancelled. After you answer, 
you hear ring back tone, and the LED flashes green (in-use).

If you hear a busy tone after answering a callback, the called party is already 
on another call or the line has already been seized or has received an 
incoming call. Your request is not cancelled. You will be called again the next 
time a line becomes idle.

If you were attempting to make an outside call, the telephone number is 
automatically dialed, including the account code or override codes that were 
used.

Press 

Auto Callback or extension button + #431.

To deactivate Automatic Callback, press the ACB button while its lamp is lit. 
When a predetermined time (overall timer) passes after Automatic Callback is 
activated, the system automatically cancels Automatic Callback. If the 
activator does not answer Automatic Callback for a predetermined time, 
Automatic Callback is automatically canceled. In either case, when Automatic 
Callback is completed or canceled, the ACB lamp button turns off.