Toshiba IP5000-Series 用户手册

1. To place a call on Hold, press the 

Hold 

button.

2. To return to the held call, press the held line’s button.

If you do not return to the held call, it rings back to your phone. 
If you are busy on another call, you hear two tone bursts. If the 
held party hangs up, the call is released.

³ To place a call on Exclusive Hold

³

While on a call, press 

Hold

 twice. This places the call on 

Exclusive Hold; no one else will be able to access that line.

³ To place a call on Automatic Hold

³

While on a call, press another extension button to receive/
originate a new call. You can switch between calls without 
having to press 

Hold

.

Make sure this feature is programmed on your system; if not, 
existing calls will drop.

Mute on the IP5000-series telephones mutes not only the microphone 
but also the handset microphone as well. The MIC button on the 
telephones toggles between Mic and Mute. When Mic button is lit, 
handsfree communication is supported, when 

Mic

 is pressed and light 

is off, Mute is enabled.

³

During a handsfree conversation, press the Mic key, the red 
indicator will turn off; the microphone and handset are 
muted.

³

Press the Mic key again to resume hands free communication, 
the red indicator will turn on.

³ To store a number on the One Touch button

1. Dial 

#9876

. 

2. Press a 

One Touch

 button.

3. Enter the number to be stored.

4. Press the 

One Touch

 button again.

One Touch buttons must be programmed on a 

Programmable Feature Button.

³ To make an All Call Page

1. With the handset off-hook, press 

All Call Page

. This pages 

all phones in the All Call Page Group, and may page external 
speakers (depends on programming).

2. Make your announcement, then hang up.