Toshiba Strata DKT 用户手册

By dialing a Class of Service (COS) Override code, a user can change a station’s set of 
privileges to one associated with the override code. When the call is terminated and 
another is attempted from the same station, the original COS is applied. This allows 
selected users to override restrictions that are placed on any telephone in the system.

To perform Class of Service Override
1. Access a Primary or Phantom DN. You hear dial tone and the LED flashes at the 

in-use rate.

2. Press 

#471

. Dial tone stops. Your LCD prompts you to enter a code.

3. Enter the COS Override Code (four digits). You hear dial tone. For security 

reasons, the override codes are only available on a selected basis. See your System 
Administrator.

4. Dial a telephone number.

This feature enables you to enter an established call on a line you share with another 
telephone. Up to two station users can enter an existing CO line-to-station call (i.e., up 
to three stations can be connected to a CO line). You can also use this feature if the 
station that is already connected to the CO line is in the Privacy Release mode. 

Station users with 

Privacy Release

 can allow stations with the shared button 

appearance to enter their conversations, even if the station entering the conversation is 
not programmed for Privacy Override. (see 

Station users can make page announcements to telephones and external speakers. 
Check with your System Administrator to find out the zone numbers for various 
paging groups. 

To make a Page Announcement to telephones or external speakers
1. Lift the handset, press extension and enter a paging access code.

2. Make your announcement, then hang up.

Press 

Group Page

 and enter the Group number (01~16)

...or press extension + 

#31

 and enter the zone number.