Toshiba Strata DK 用户手册

The LED color indications described here apply to DSS Console models HDSS2060 
and HDSS1060. Flash conditions described here apply to all DSS Console models.

To call a station [PDN] from a DSS Console, press the [DSS] associated with the 
station. A station call with a [DSS] button can be made on-hook or off-hook and with 
Voice First or Tone signaling. After pressing the button, treat the call like any other 
station call made from a electronic telephone.

[DSS] LEDs show if the associated station is idle or busy. The LED is steady red if the 
station is busy or ringing, and is not lit if idle. If all the station’s PDN buttons are 
being used by other stations, the [DSS] LED of the station lights steady red, but the 
station may be idle. If the station is in the DND mode, its [DSS] LED lights steady 
red.

You can transfer internal or outside calls to an idle station from a DSS Console. You 
can transfer a call to a busy station from your DSS Console. Use [DSS] to transfer the 
call, even though the [DSS] LED for the station you are transferring to is red.

➤

1. Press the [DSS] 

button associated 
with the called 
station.

The call is automatically placed on hold. The CO or 
[DN] LED flashes at double the on-hold rate, and the 
[DSS] LED flashes.

You hear a single-ring tone. If using the tone signaling 
mode, you hear successive ring tones.

2. Announce the call.

With tone signaling, you have to wait for the called 
station to answer before announcing the call.

3. Hang up.

The call rings the called station when you hang up. 
While the called station is ringing, the [DSS] LED is 
steady red, and the CO LED flashes at the on-hold rate 
or if on a [DN] button, it goes idle.