Toshiba DK424I 用户手册

This program assigns lines to CAMA trunk groups. Each RCMU/RMCS line used must be 
assigned to one of the eight CAMA trunk groups using Program *11-1. The RCMU/RMCS system 
line number (not the CAMA trunk number, 1~4) is entered into the appropriate CAMA trunk 
group in this program. If CAMA trunks are not assigned in this program, the E911 CAMA feature 
will not operate.

When the RCMU/RMCS PCBs are installed, they assume the next four consecutive system CO 
line numbers. For example if a normal ground start line PCB, RGLU, is installed in slot 12, its 
system line numbers are 01~04. And, if the RCMU/RMCS is installed in slot 13, its line numbers 
are 05~08.

This program also allows any type (ground, loop, Tie, DID) line to be assigned in CAMA Trunk 
Groups. This is to allow 911 calls to be routed out normal CO lines in case the CAMA trunk(s) can 
not be accessed (busy or out of service). If the 911 call hunts from the CAMA trunk(s) in a CAMA 
Trunk Group to a normal CO line in a CAMA Trunk Group, the 911digits (dial pulses or DTMF 
tones) will be sent out the normal line without the station CESID information digits. The normal 
lines assigned in CAMA trunk groups can be assigned in Program 16 line groups as well. 

It is recommended to always assign normal lines in CAMA Trunk groups to back CAMA trunks.

✱  ✱  ✱ ✱  6SNU ✱   +ROG  6SNU 

+ROG  6SNU   +ROG  6SNU   +ROG

DK14

001~004

B1CU

001~032

DK40i

001~012

B2CAU/BU

001~120

RCTUA

001~016

B3CAU/BU

001~120

RCTUBA/BB

001~048

B5CAU/BU

001~200

RCTUC/D

001~144

RCTUE/F

001~200

01

02

03

04

05

06

07

08

Line circuit number of CAMA trunk: Turn On 
LED of line that corresponds to the CAMA trunk 
position in the system.

CAMA Trunk Group (01~08)