Toshiba DK424I 用户手册
System & Station
Program 10-4 – ACD/ISDN/Tandem Parameters
Strata DK Programming 5/00
3-39
System & Station
Program 10-4 – ACD/ISDN/Tandem Parameters
Initialized Default:
LEDs 12 and 14 are On
Program 10-4 Overview
This program enables various station and line features, including Call Waiting, Tie line tandem
connections, Single Line Telephone call retrieval, ISDN and LDN routing.
connections, Single Line Telephone call retrieval, ISDN and LDN routing.
Important!
This program also covers ACD features. See Chapter 6 of this document for
Program 10-4 ACD functions.
Program 10-4 ACD functions.
LED 09: Listed Directory Number (LDN) Registration (Release 4.15)
On ISDN incoming calls, LDN Registration routes unknown number or call type in numbering
plan when LED 09 is On; unknown number or call type will not route and caller hears reorder tone
when LED 09 is Off.
plan when LED 09 is On; unknown number or call type will not route and caller hears reorder tone
when LED 09 is Off.
LED 10: Not Used
LED 11: PRI ISDN Timer
The T-Wait timer is an ISDN timer that is required to reduce the potential for a network overload
condition due to a large number of ISDN terminals requesting initialization at the same time (e.g.,
due to an area-wide power failure). This timer creates a random time interval and is called upon
power up to set a value to delay the initialization process until the timer has expired. This timer is
seldom used for PRI interfaces.
condition due to a large number of ISDN terminals requesting initialization at the same time (e.g.,
due to an area-wide power failure). This timer creates a random time interval and is called upon
power up to set a value to delay the initialization process until the timer has expired. This timer is
seldom used for PRI interfaces.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU
+ROG 6SNU +ROG 6SNU +ROG
Button/
LED
X
LED On
LED Off
20
Call Waiting LCD DIsplay (R4.15)
No Call Waiting LCD Display (R4.15)
19
Tie line tandem 16 connection buffers. (R4.3)
No Tie line tandem connection buffers. (R4.3)
18
Tie line tandem 8 connection buffers. (R4.3)
No Tie line tandem connection buffers. (R4.3)
17
Tie line tandem 4 connection buffers. (R4.3)
No Tie line tandem connection buffers. (R4.3)
16
Not used.
Not used.
15
Single Line Telephone (SLT) can retrieve held call.
SLT cannot retrieve held call.
14
ISDN “Start” access code is sent when the Speed Dial
(SD) button is pressed (initialized) (R4.15).
(SD) button is pressed (initialized) (R4.15).
ISDN Start access code is not sent.
13
Receive 3.1kHz audio calls as speech calls only if a
progress indicator is sent.
progress indicator is sent.
Always receives 3.1kHz calls.
12
BRI T-Wait On (initialized)
BRI T-Wait Off
11
PRI T-Wait On
PRI T-Wait Off (initialized)
10
Not used.
Not Used.
09
Listed Directory Numbers (LDN) Registration will route
unknown number or call type in numbering plan.
unknown number or call type in numbering plan.
Unknown number or call type will not route and caller
will hear reorder tone.
will hear reorder tone.
Light Button/LEDs as defined by the table below. If
the X column is checked, the LED should be On.
the X column is checked, the LED should be On.
SELECT = 4