Toshiba CIX 用户手册

If you call an extension and it’s busy or there is no answer, you may be able to light 
that extension’s Message Waiting LED and enable that extension to call you back. 
The ability to perform this feature is set in system programming.

1. Dial an internal extension. You hear busy tone or there’s no answer.

2. Press 

Msg

 or 

7

. The Msg LED flashes red on the called telephone. At your 

telephone, the Msg LED lights steady red and the LCD shows the station number 
where you set a Message Waiting light. Example: “MW SET TO 3620.”

If you decide to cancel the Message Waiting light at this point, press 

Msg

 or 

7 

again while ring-over tone is playing and the light will be cancelled.

3. Press 

Spkr

. Your Msg LED turns Off. The Msg LED on the called telephone 

flashes until the called party presses the flashing 

Msg

 button which calls you back.

4. To turn Off a Message LED that you have set on another extension, press 

#64

 plus 

the extension number that has the message light set. Then press 

Spkr

 or hang up to 

release your telephone. Your LCD shows the extension and “MW CANCEL.”

...or dial the extension that you set the Message LED on, then press 

77

. Then press 

Spkr

 or hang up to release your telephone.

To turn the Microphone On/Off when the speakerphone is active (Spkr LED is 
On), press 

Mic

.

When the Microphone is On, the Mic LED is On, steady red. When Mic is Off, the 
LED is Off and you cannot be heard through the microphone.

The microphone and its LED are always On when you receive a Voice-first internal 
call and Off when you receive a Ring-first call.

Each station’s microphone can be set in system programming to:

•

switch On/Off with one touch

•

switch Off only while pressed and held

•

either On/Off at the start of handsfree dialing.

To talk back to a Handset Off-hook Call Announce call, press and hold 

Mic

 and 

talk over your telephone handset/headset. The LED and microphone remain Off.