Toshiba DK40I 用户手册
System & Station
Program 60-8 – Call Forward External (Remote Change, Security) ID Code
Strata DK Programming 5/00
3-147
System & Station
Program 60-8 – Call Forward External (Remote
Change, Security) ID Code
Change, Security) ID Code
Processor Type:
DK14, DK40i, all RCTUs and BCUs
Program Type:
System
Initialized Default:
No digits
Program 60-8 Overview
Changes a telephone’s External Call Forward destination to [PDNs] but not [PhDNs] from outside
the system. The person that wishes to change the destination must call into a DISA CO line, enter
the telephone’s [PDN] +
the system. The person that wishes to change the destination must call into a DISA CO line, enter
the telephone’s [PDN] +
and then enter a security code plus the destination telephone
number. CF/EXT ID code must be assigned to a telephone to allow callers to change the Call
Forward-External destination of that telephone from a remote location by calling in on a DISA CO
line.
Forward-External destination of that telephone from a remote location by calling in on a DISA CO
line.
The security code (1~15 digits) for each telephone is set with this program.
Important!
To allow Call Forward External, CO lines must be enabled for the following:
●
Two CO line connection in Program 10-1 and Program 15-5.
●
Outgoing Access in Program 41 including DISA port numbers.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU
+ROG 6SNU +ROG 6SNU +ROG
Processor Type
Port Range
Processor Type
Port Range
DK14
000~009
B1CU
000~055
DK40i
000~027
B2CAU/BU
000~111
RCTUA
000~031
B3CAU/BU
000~191
RCTUBA/BB
000~079
B5CAU/BU
000~335
RCTUC/D
000~239
RCTUE/F
000~335
Telephone Port
Number
CF/EKT ID Code
(1~15 digits)
Telephone Port
Number
CF/EKT ID Code
(1~15 digits)
Telephone Port
Number
CF/EKT ID Code
(1~15 digits)
More Codes
DATA = ID code (1~15 digits)
When entering less than 15 digits, enter digits,
then press Hold.
When entering less than 15 digits, enter digits,
then press Hold.
LED Button 01 = blanks, erases data
LED Button 02 = a wild card (can be any digit
from 1~9)
LED Button 02 = a wild card (can be any digit
from 1~9)
SELECT = 8
Telephone port number to
which the CF Ext ID (security)
code will be assigned.
which the CF Ext ID (security)
code will be assigned.