Toshiba DK40I 用户手册

Day, Day2, Night refer to the 

1LJKW7UDQVIHU

 button’s three modes. 

Programs 81~89 are used to ring individual attendant consoles and/or to enable attendant console 
incoming CO line call load sharing. (See “Auto Attendant Delay Ring” and “PC and Conventional 
Attendant Console Programming Overview” in Chapter 11 – Station Apparatus of the Strata DK 
I&M Manual.)

In Programs 81, 84, and 87, assign all CO lines (ground, loop, and DID) that should alternately 
ring multiple attendant consoles to the respective Load Share console ports (see “Attendant 
Console Load Share Programming Example” on Page 11-40 of the Strata DK I&M Manual.

On DID lines, when the digits assigned to console ports in Program *09 are dialed on incoming 
calls, the calls will alternately ring the Load Share consoles.

➤

If the Auto Attendant must answer calls on the first ring, do not assign CO lines to ring 
telephones in Programs 81~89.

1. Assign CO lines to ring the Auto Attendant (AA) in Program 78.

Program 78-61:

AA DAY

Program 78-62:

AA DAY 2

Program 78-63:

AA NIGHT

2. Assign stations that should ring (immediately for 12 seconds) before the AA answers to the 

AA CO lines in Program 81 (84 – Day 2, 87 – Night). Also assign the [DN] that should flash 
when the CO lines ring with Program *81 (*84 – Day 2, *87 – Night). As an option, the station 
can be equipped with the appropriate CO 

/LQH

 or 

3RROHG/LQH*US

 buttons in which case you 

should not program a [DN] to flash with Program *81.

♦

Stations assigned in Program 81 and the [DN] assigned in Program *81 – ring immediate 
for 12 seconds and then stop ringing unless they are also assigned to ring in Program 82. 
Assign [DN] for the appropriate CO 

/LQH

 or 

3RROHG/LQH*US

 buttons to these ports using 

Program 39.

3. Assign stations that should ring (after a 12-second delay – for 12 seconds) before the AA 

answers to the AA CO lines in Program 82 (85 – Day 2, 88 – Night). Also assign the [DN] that 
should flash when the CO lines ring with Program *81 (*84 – Day 2, *87 – Night). As an 
option, the station can be equipped with the appropriate 

&2/LQH

 or 

3RROHG/LQH*US

 buttons 

in which case you should not program a [DN] to flash with Program *81.

♦

Station assigned in Program 82 and the [DN] assigned in Program *81 – ring after a 12-
second delay for 12 seconds and then stop ringing. Assign the appropriate [DN] or 

/LQH

 or 

3RROHG/LQH*US

 buttons to these ports using Program 39.

Day2 Delay2

Same as Day Delay 2 except during Day 2.

Night Immediate

Same as Day Immediate except during Day2 NT mode.

Night Delay1

Same as Day Delay 1 except during Day 2 NT mode.

Night Delay2

Same as Day Delay 1 except during Day 2 NT mode.